Three-Chuck Laser Tube Cutting Machine
1500W–12000W
An industrial fiber tube cutter for steel and alloy pipes, designed for accuracy and stability in long-pipe cutting — three chucks clamp the tube through its full length, so even the tail end becomes usable parts.
- Three Chucks — Full stroke for more stable cutting
- Machine Bed — Side-hung frame, high-low rail layout
Why this machine
Full stroke for more stable cutting
All three chucks sit on the left of the cutting head and clamp the pipe together, preventing thin-walled pipes from sagging or bending in the middle and keeping machining accuracy high along the whole length — down to the final part, with no wasted tail.
- Zero-tail and short-tail cutting modes
- Pneumatic chucks with automatic centering
- Stable clamping of thin-wall and long, heavy tubes
Side-hung frame, high-low rail layout
The side-hung bed lowers the center of gravity for easier loading, and the high-low rail arrangement keeps the moving load balanced along the full pipe length — for smooth chuck travel at high speed.
- Lower loading height for heavy and long tubes
- Follow-up supports prevent tube deflection
- Optional automatic loading and unloading
Technical Parameters
- Power
- 6–12kW
- Processing Diameter
- Ø20–Ø280mm · □20×20–□280×280mm
- Max Load per Piece
- 500kg
- Power
- 6–12kW
- Processing Diameter
- Ø20–Ø360mm · □20×20–□360×360mm
- Max Load per Piece
- 1200kg
- Power
- 6–12kW
- Processing Diameter
- Ø50–Ø510mm · □50×50–□510×510mm
- Max Load per Piece
- 2500kg
Need a different format or power level? Ask us — configurations can be matched to your material and output.
Profiles & Wall Thickness
Round, square, rectangular, oval and open profiles (angle, channel, H-beam) are supported. Typical maximum wall thickness by laser power:
| Material | 6kW | 12kW |
|---|---|---|
| Carbon Steel | 16mm | 25mm |
| Stainless Steel | 12mm | 20mm |
| Aluminum | 10mm | 16mm |
Reference values — actual results depend on profile, wall thickness and cut geometry. Send us your tube drawings for a cutting test. Request a sample test
Built on industrial-grade parts
Fiber Laser Source
Continuous fiber laser, 6–12kW, sized to your wall-thickness range.
Three Pneumatic Chucks
Automatic centering and full-length clamping for zero-tail cutting.
Side-Hung Bed
Low center of gravity with high-low rails for smooth, fast chuck travel.
Tube CNC & Nesting
Imports 3D tube drawings, nests parts along the tube and simulates the cut.
Where the T3 Series is used
Furniture & Fitness Equipment
Chair frames, racks and gym equipment from round and square tube.
Steel Structure
H-beam, channel and large pipe for buildings, bridges and towers.
Agricultural & Construction Machinery
Frames, booms and chassis members with precise holes and slots.
Automotive & Motorcycle
Roll cages, exhaust pipes and frame tubes with accurate intersections.
Oil, Gas & Energy
Pipeline fittings, scaffolding and solar support structures.
Shipbuilding
Large-diameter pipe and profiles for hull structures and piping.
T3 Series questions
With three chucks the tube is supported on both sides of the cut throughout, so long or thin-wall tubes don't sag, and the last section can be cut into parts instead of being thrown away as tail scrap.
M28 covers round tube up to Ø280mm, M36 up to Ø360mm, and M52 up to Ø510mm with loads up to 2500kg per piece. Tell us your largest and heaviest tube and we will recommend a model.
Yes — angle, channel and H-beam can be processed in addition to closed round, square, rectangular and oval tubes.
Yes, bundle loading and automatic unloading are available as options for high-volume production.
Yes — installation and commissioning support, training on the machine and the tube nesting software, and ongoing remote technical support.
Request a Quote
Tell us your material, thickness and output — a sales engineer will reply within 24 hours with a configuration and price.
Contact
- Phone
- +86 186 0125 7403
- +86 186 0125 7403
- sales@scsplaser.example.com
- Address
- Room 2-1701, Building 4, Dinghao Plaza, No. 44 Gongye South Road, Shunhua Road Subdistrict, High-tech Zone, Jinan, Shandong, China